The Invereco Series Pool Heat Pump

  • Environmentally friendly R32 refrigerant
  • Wi-Fi as standard
  • Super Efficient
  • Low operating Costs
  • Anti-corrosion ABS casing
  • Perfect swimming season extender
  • Upto 24 kW in single phase 
Summer Eco pool heat pump from Adelaide Heat Pumps

If you have a pool in Adelaide or anywhere in South Australia you no longer need to fear the cold. The Summer Eco Heat Pump range has been specially designed to extend the swimming season of your pool whilst efficiently using electricity. 

Built with efficiency and simplicity in mind the quiet, long lasting and easy to use Summer Eco is perfect for energy conscious minds. With low energy and night time mode, it means efficiency can be is increased by up to 20%, and with WiFi as standard you can change your pool temperature and timers from wherever you are. State of the art anticorrosion ABS casing means you can be sure your pool stays warm season after season no matter where you live.

Inverter technology allows the swimming pool heat pump to reach an extremely high COP compared with normal on/off style heat pumps in the market. The unique inverter technology reduces the speed of the unit as it reaches the desired temperature. This greatly saves on energy and enables you to enjoy swimming quicker and at a constant temperature. By utilising R32 Gas as a Refrigerant you will enjoy higher efficiency . This means quicker heating times and less energy used to heat up your pool. With Wifi control as standard you can change the temperature of your pool or turn the heating on or off from anywhere in the world.

Why choose the Summer Eco Series?

Free Summer Eco Series Pool Heat Pump sizing and quote

Leave your details below if you would like one of the Adelaide Heat Pumps team to contact you.

Or call us direct on 08 8132 5969 and chat to one of our Summer Eco Series Pool Heat Pump Specialists. 

INVERECO RANGE

Quiet, long-lasting simple to operate. Madimack’s
InverECO delivers a perfect pool heating solution for
the energy conscious pool owner. This pool heater is
fitted with all the necessities required to heat backyard pools.

Built with efficiency and simplicity in mind the quiet, long-lasting and easy to use Eco is perfect for energy-conscious minds. With low energy and night time mode, it means efficiency can be increased by up to 20%, and with WiFi as standard, you can change your pool temperature and timers from wherever you are. State of the art anti-corrosion ABS casing means you can be sure your pool stays warm season after season no matter where you live. This electric pool heat pump series is ideal for recreational pool & spa owners.

Engineered design & quality

  • Designed and Engineered for Australian conditions

  • Market leader in heat pump technology

  • high quality componentry and heat exchanger for any chemical balance

Installation flexibility

  • Small footprint and corrosion resistant casing for high salt areas

  • Active defrost function to assist operations in cold climates

  • Operates in cold climates down to minus 5°C

Powered by InverMAC Technology

  • Energy efficient operation saves up to 66% compared to other forms of pool heating

  • Renewable energy compatible

  • High efficiency inverter technology

Madimack’s enhanced inverter technology, InverMAC, is engineered to support inverter motor operation. The inclusion of product specific proprietary technology allows for precise control of motor speed and energy usage across our range. InverMAC technology supports Madimack’s overall position of unrivalled innovation, sustainability and performance. By incorporating inverter motor technology in creative and unique ways, Madimack is leading the way in the development of energy-efficient products.

Energy efficient with COP up to 11

Full inverter compressor and inverter fan

Five models up to 24 kW in single phase

Quieter operation than on/off technology

Anti-corrosion ABS casing

Easy to use controller

Slim design

Wi-Fi as a standard feature

Titanium heat exchanger with 25-year warranty

Front discharge air outlet

Reverse cycle defrost

Built-in flow switch and safety devices

Latest most eco-friendly R32 Refrigerant

TüV Rheinland certified

Up to 40 degrees set point temperature

SPECIFICATIONS:

ModelEC090EC0130ECO160ECO200ECO240
PERFORMANCE CONDITION: Air 27°C/ Water 27°C/ Humid. 80%
Heating capacity9 kW13 kW16.1 kW20.4 kW24.4 kW
COP Range10.8~6.411.0~6.310.9~6.210.8~6.210.9~6.3
PERFORMANCE CONDITION: Air 15°C/ Water 26°C/ Humid. 70%
Heating capacity6.5kW9 kW11 kW14.1 kW16.1 kW
COP Range6.4~4.46.4~4.76.6~4.36.4~4.36.6~4.5
TECHNICAL SPECIFICATIONS
Operating air temperature-5°C~43°C
CompressorFull Stepless DC Compressor
CasingABS Anti Corrosion Case
Heat exchangerTwisted Titanium Heat Exchanger
Power supply240V 1Ph
Electrical connection10A plug15A plugHard wiredHard wiredHard wired
Rated input power0.28~1.55 kW0.41~2.01 kW0.50~2.56 kW0.60~3.26 kW0.72~3.81 kW
Rated input current1.21~6.73 A1.76~8.70 A2.17~11.12 A2.61~14.16 A3.13~16.56 A
Maximum input current8 A12.5 A17 A19.5 A20 A
Sound level at 1m dB(A)41.6~53.543.9~54.046.2~57.346.3~58.146.9~58.7
Sound level at 10m dB(A)21.6~33.523.9~34.026.2~37.326.3~38.126.9~38.7
Advised water flow (L/Min) ±20507590120150
Water connection40 mm40 mm40 mm40 mm40 mm
Net weight46 kg49 kg61 kg67 kg67 kg
Net dimension L x W x H (mm)903x349x654903x349x654903x349x654903x349x654903x349x654
RRP 

*ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE PLEASE SEE DATA PLATE ON PRODUCT FOR SPECIFIC SPECIFICATIONS.

*Unless purchased through a Certified Madimack Online Dealer, product warranties revert to statutory 12 month warranty. Refer to Madimack website for list of Certified Online Dealers in order to secure expert service & support of Madimack products.